Layer Tools
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Layer Names Manager
CmdLine : CP_LAYERMAN
The CP_LAYERMAN command is used for managing the layer names, you can add Suffix / Prefix to layer names, change the case of the layer name, Merge layers etc.
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Isolate layer(s)
CmdLine : CP_ISOD
The CP_ISOD command is used to isolate (segregate) layer-wise data from large complex drawings. It thaws and switches on the layers of selected objects and freezes all other layers in the drawing.
The CP_ISOD command provides two ways to select layers to isolate – by picking an object on the layer or by selecting from a list.
Note: CP_ISOD command stores the current layer settings as CADPower_ISO and can be restored using the CP_RESTORE command.
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Restore Isolated layer(s)
CmdLine : CP_RESTORE
The CP_RESTORE command is used to restore the layer settings stored by the CP_ISOD command.
The next 3 commands CP_SL1, CP_SL2, CP_SL3 allow three pre-defined layer states to be set.
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Save layer state - 1
CmdLine : CP_SL1
Description Pending
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Save layer state - 2
CmdLine : CP_SL2
Description Pending
Toolbar : Layer Tools (CP)
Menu : CADPower -> Layer -> Save layer state - 3
CmdLine : CP_SL3
The next 3 commands CP_RL1, CP_RL2, CP_RL3 allow the three pre-defined layer states to be restored.
Toolbar : Layer
Menu : CADPower -> Layer -> Restore layer state - 1
CmdLine : CP_RL1
Description Pending
Toolbar : Layer
Menu : CADPower -> Layer -> Restore layer state - 2
CmdLine : CP_RL2
Description Pending
Toolbar : Layer
Menu : CADPower -> Layer -> Restore layer state - 3
CmdLine : CP_RL3
Description Pending
Toolbar : Layer
Menu : CADPower -> Layer -> Change to current layer
CmdLine : CP_CCL
The CP_CCL command changes selected objects to current layer.
Toolbar : Layer
Menu : CADPower -> Layer -> Copy to current layer
CmdLine : CP_CPCL
The CP_CPCL copies selected objects into current layer.
Toolbar : Layer
Menu : CADPower -> Layer -> Copy from one layer to another
CmdLine : CP_COPYLYR
The CP_COPYLYR command is used to copy all objects from one layer to anothe